Also, it helps if the DVD drive has support for whatever OS you are using. Cross-point screwdriver suitable for your PC case. Did this article help you? note: Disconnect the power and remove your PC's cover, see our guide. Source
If you have trouble removing the "blank" you can use a flat ended screwdriver to ease it out, taking care not to damage the case. There are a variety of confusing formats for DVD drives, including DVD, DVD+R, DVD-R, DVD+/-R, DVD+/-RW. Wenn du bei YouTube angemeldet bist, kannst du dieses Video zu einer Playlist hinzufügen. Wird geladen...
Melde dich an, um dieses Video zur Playlist "Später ansehen" hinzuzufügen. CMOS setup Once the disc drive has been connected to the computer, place the case back onto the computer and connect the keyboard, monitor, and power to the computer (we recommend Melde dich bei YouTube an, damit dein Feedback gezählt wird. How To Connect Dvd Drive To Motherboard Sata Wiedergabeliste Wiedergabeliste __count__/__total__ HOWTO install a CD/DVD drive into a computer nickzpc AbonnierenAbonniertAbo beenden1.0181 Tsd.
Removal of these generally is done by pushing some tabs either on the inside or outside of the case. How To Connect Dvd Drive To Motherboard Anmelden 5 0 Dieses Video gefällt dir nicht? Advertisement twitzid_klow Thread Starter Joined: May 11, 2002 Messages: 84 im trying to install a philips 20x10x40 cd burner on my computer i've done everything the manual has said to do Wird geladen...
The CPU casing wasn't opened at all)
SATA cables can only be inserted one way but ensure the cable is fully inserted. Finishing the IDE installation Double check all connections and make sure the device is set correctly as master or slave. How To Install Dvd Drive On Pc Bitte versuche es später erneut. How To Install Cd Drive In Laptop Software setup IDE/EIDE CD-ROM drives only require the one or two CD-ROM drives for the drives to work.
Additional computer CD-RW help and support. this contact form The audio cable will connect to one of the following locations: sound card, motherboard (when onboard sound present), or DVD decoder card. Plug the AC cord back into the power supply and be sure to flip the switch to the on position.The computer system should automatically detect and begin using the new Power on your computer. Method 3 Installing the Drivers and Software 1 Wait for your operating system to detect the drive. Install Dvd Drive Windows 7
Some CD/DVD writers work best when they are the master others work fine regardless, always consult the manufacturers instructions that came with your CD/DVD Writer. Many drives come with packaged software that allows you to burn media to blank DVDs, or watch HD video. Anmelden 416 69 Dieses Video gefällt dir nicht? have a peek here Wird verarbeitet...
To install the drive, it will be necessary to remove a 5.25" drive slot cover from the case. How To Install Dvd Drive In Laptop Ensure that you are inserting the drive right-side up. 8 Secure the drive. See our CD-ROM and DVD definitions for further information and related links.
Otherwise check the Phillips site for drivers that work with XP. The data cable is labelled A and the power cable is labelled B. The recommended sequence is to remove the cables from the device first before removing the fixing screws. Dvd Drive Power Cable Melde dich bei YouTube an, damit dein Feedback gezählt wird.
One drive is listed as the master and the other secondary drive is listed as a slave. Hinzufügen Playlists werden geladen... Rockn, Jul 18, 2002 #3 This thread has been Locked and is not open to further replies. Check This Out To the left is an example of a data cable and a power cable correctly inserted into a device.
What are jumpers? When they are all in place tighten them completely. WiedergabelisteWiedergabelisteWiedergabelisteWiedergabeliste Alle entfernenBeenden Das nächste Video wird gestartetAnhalten Wird geladen... Wird geladen...