Disruptive posting: Flaming or offending other usersIllegal activities: Promote cracked software, or other illegal contentOffensive: Sexually explicit or offensive languageSpam: Advertisements or commercial links Submit report Cancel report Track this discussion I want to put an IDE drive into a SATA computer. The time now is 02:26 AM. Cerrar Más información View this message in English Estás viendo YouTube en Español (España). Check This Out
SHOW ME NOW CNET © CBS Interactive Inc. / All Rights Reserved. Xp. The drive can be a SATA or PATA hard disk drive (2.5" or 3.5"), or it could be any kind of optical drive, such as a SATA DVD or legacy CD I have two choices 1 - to replace the hard drive and reboot my machine using my back up programme with a view to buying a new machine when Microsoft issue
Cargando... After that my ide and sata drive were in conflict the sata would boot perfectly but when the ide drive was connect it just would not boot. Unfortunately some are flimsy or have poor quality control.
This is where you want to put an IDE drive into a SATA-only motherboard or vice versa. Acción en curso... Thank you for helping us maintain CNET's great community. Installing Bios On New Motherboard Siguiente How to connect SATA devices in a PATA (IDE) only PC system - Duración: 2:33.
Very Useful…Thanks DID YOU KNOW?The slang term "flick" to refer to a movie, as in "we caught a flick", came about as a result of early movie equipment-early projectors used arc Pc Build First Boot OSNews.com uses icons from the Tango Project and FamFamFam. I've just copied my C drive onto a new SATA drive using Norton Ghost. Powered by vBulletin Version 4.2.0 Copyright © 2017 vBulletin Solutions, Inc.
This will enable a sufficient amount of air to flow between the two drives. How To Install Bios Asus Drive enclosure for permanent use. Flag Permalink This was helpful (0) Back to Storage forum 7 total posts Popular Forums icon Computer Help 51,912 discussions icon Computer Newbies 10,498 discussions icon Laptops 20,411 discussions icon Security Note that I'm not necessarily recommending this boot cd over others, it's just the one that I'm most familiar with.
When you are inserting the screws do not tighten them completely until you have all of the screws inserted, this will make it easier to align each screw. Install a SATA drive If you are replacing an existing drive then the new drive will simply go in the same position (drive bay) as the old drive. New Computer Bios Setup Important: Make sure you follow the manufacturer's instructions carefully when updating the BIOS. How To Install Bios On Motherboard The next step is to insert the drive into its new home.
My manual says nothing about how to setup SATA!!!! his comment is here and does asus notherboard have a program that lets you update your mother board when done installing windows. The process isn’t overly difficult, but is detailed enough to warrant its own post. If you have a motherboard like this, you can use the extra plug on the IDE ribbon cable to add one IDE hard disk to the system. How To Setup Bios In Windows 7
This was fixed in service pack 1. If you already have an optical drive installed then if possible leave a gap in-between it and the new drive. IDE includes sub-standards with names like EIDE, ATAPI, ATA, ATA-1, ATA-2, UDMA, ATA-4, ATA-133, and more. http://apksoftware.com/how-to/need-help-setting-up-2-os-on-1-computer.html Your motherboard likely has a Hardware Monitor screen, where you can see detailed information about temperatures, voltages, and even the speed of the fan.
If at all possible, I'd like to install the larger of the two old drives as a slave in my new machine just for storage and back up purposes.Help~! His hobby is refurbishing computers as a form of social work and environmental contribution. Transcripción La transcripción interactiva no se ha podido cargar. Pc First Boot No Display You may wish to test the device is correctly installed before replacing the covers but it is advisable to replace the covers before reconnecting the mains.
The good news is that learning how to install a new hard drive isn’t difficult, so there is no need to be concerned about a hard drive that is nearly full. If you want to keep this drive separate from another drive in your PC, we recommend buying a new SATA drive of the same or larger capacity and cloning your IDE There are two types of SATA power, standard 4-pin molex connectors (that power practically everything else in your computer, CD, graphics cards etc.) and the new SATA connectors. navigate here With a new 1TB hard drive costing around £45, it's well worth considering one of these as a replacement for an IDE drive.
Categoría Ciencia y tecnología Licencia Licencia de YouTube estándar Mostrar más Mostrar menos Cargando... Select Advanced. 3. If you are building a computer that won't have a keyboard attached (like a server), you might want to disable the "Wait For F1 If Error" option, which will allow the If you have problems try treating them like a loose tooth, gently but firmly pulling while rocking the cable slightly from side-to-side.